Blowing System:
Before delivery, preforms are lifted and sorted by a dumper, a preform elevator and a preform sorter. Preforms are transported by a star wheel to the preform deduster to clean the preforms from dust. Then, preforms are connected to the heating head and heated at their bodies and bottoms excepting mouths to be cooled down. After that, preforms are transported to opening and rotating molds. Preforms are stretched and huffed by the air cylinder. Low-pressure is needed for the first blow and high-pressure for the second blow. The molds would be opened automatically after exhaust and then bottles would be transported out of the machine.
Rinsing System
1. The equipment applies unique overturning bottle clamp, which is hygienic and durable. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp.
2. The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
3. All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
Filling System
1. Clip the bottle neck with steel starwheel. There is no need to adjust the equipment height when changing the bottle shape whose diameters have no much change.
2. Rotating disks all make from stainless steel ANSI304. Large planar toothed bearings can ensure the stable operation of machine.
3. High-precision electronic liquid level filling valve makes fast and slow fillings possible.
4. Automatic washing cup can circularly and thoroughly clean the filling valve through CIP cleaning program.
5. Integrate filling valve with bottle lifting mechanism. The simplified structure makes cleaning easier and could improve the stability of the machine. Bottleneck is clipped by clippers.
Capping System
1. Adopt magnetic constant torque capping head, which is stable. And the capping defective rate is smaller than 0.2%.
2. There is a line of optoelectronic switches in the cap falling guide rail. If there is no cap in the rail, the machine would automatically stop, sparing the situation of no cap.
3. Bottle-in detection switch is equipped in the capper. The cap locking cylinder connected to cap falling guide rail and cap moving disk continuously control the discharge of caps, so as to ensure no cap-in when there is no bottle, reducing the abrasion of caps.
Main Products:
| Beverage Processing System |
System |
Equipment |
Design capacity |
| Water Treatment System |
Pre-filtration System\Membrane Separation System\Sterilization System |
5-100 T/hr |
| Processing System |
Dissolving Unit\Extraction Unit\Fermentation Unit\Blending Constant Volume Unit |
5-60 T/hr |
UHT System\CIP System\
Disinfectant System\Carbon Mixer |
|
| |
|
|
|
| Packaging System |
System |
Equipment |
Design capacity |
| Blow Moulding System |
0.25~15L |
1200-81000 BPH |
| Filling System |
Water Filling\Aseptic Filling\Ultra-clean Filling\Hot Filling\CSD Filling |
1200~81000 BPH |
| Combibloc |
Starbloc\(Big)Bottled Water Combibloc\Aseptic Combibloc\Ultra-clean Combibloc\CSD Combibloc\
Hot-fill Combibloc\
Non-beverage Combibloc |
1200-81000 BPH |
| Conveying System |
Air Conveyor\
Bottle Unscrambler\
Bottle tilting chain\
Showering Cooling Tunnel\
Bottle Warmer\
Bottle(Case, Pallet) Conveyor |
5000~81000 BPH |
| |
|
|
|
| External Packing System |
System |
Equipment |
Design capacity |
| Film Wrapper |
Transparent\Colorful Film |
60~120 box(case)/min |
| Carton Packer |
Robot Packer\
Wrap around packer |
60~120 box(case)/min |
| Bottle(Can) Palletizer(Depalletizer) |
PET Bottle\Can\Glass Bottle |
5000-72000 BPH |
| Case Palletizer(Depalletizer) |
Carton\Plastic Crate |
5000-81000 BPH |
| Labeler |
Hot Glue\Self-adhesive Sticker\
Cold Glue\Pre-applied Glue |
6000-48000 BPH |
| |
|
|
|
| Internal logistics system |
System |
Equipment |
Remark |
| Intelligent Warehouse |
Rail Guided Vehicle\Automated Guided Vehicle\Stacker\ Automated Loading System |
|
| Warehouse Control System |
Racking System |
|
| Warehouse Management System |
WMS combined with Enterprise's system |
|
| |
|
|
|
| Management Platform for Intelligent Factory |
System |
Equipment |
Remark |
| Central Electrical Control System for Whole Line |
Operation Monitoring\Data Collection\Reports\Energy Management |
|
| Remote |
24 hours customer service line\Remote diagnosis to solve technical fault quickly\Professional support & technical training |
|
){kind=link}